Polar

DESCRIPTION

This method keyword requests that the dipole electric field polarizabilities (and hyperpolarizabilities, if possible) be computed. No geometry change or derivatives are implied, but this keyword may be combined in the same job with numerical differentiation of forces by specifying both Freq and Polar in the route section. Freq and Polar may not be combined for methods lacking analytic gradients (MP4(SDTQ), QCISD(T), CCSD(T), and so on). Note that Polar is done by default when second derivatives are computed analytically.

The polarizability and hyperpolarizability are presented in the output in the standard orientation in lower triangular and lower tetrahedral order, respectively: αxx, αxy, αyy, αxz, αyz, αzz and βxxx, βxxy, βxyy, βyyy, βxxz, βxyz, βyyz, βxzz, βyzz, βzzz.

Normally, polarizabilities and hyperpolarizabilities are computed using static frequencies. However, frequency-dependent polarizabilities and hyperpolarizabilities [Olsen85, Sekino86, Rice90, Rice91, Rice92] may be computed by including CPHF=RdFreq in the route section and specifying the desired frequency in the input file.

Optical rotations [Rosenfeld28, Condon37, Eyring44, Buckingham67, Buckingham68, Atkins69, Barron71, Charney79, Amos82, Jorgensen88] may also be predicted via the OptRot option [Karna91, Helgaker94, Pederson95, Kondru98, Stephens01, Mennucci02, Ruud02, Stephens02a, Stephens03]. See [Stephens05, Wilson05, Stephens08] for example applications.

OPTIONS

OptRot
Perform optical rotation calculation. Use CPHF=RdFreq to specify the desired frequencies. Available for HF and DFT only. This option cannot be combined with NMR. Include IOp(10/46=7) in the route section to include the dipole-quadrupole contribution to the dipole-magnetic dipole polarizability in order to compute the full optical rotation tensor [Pedersen95, Barron04]; the latter will be labeled as Optical Rotation G’ tensor in the output. Note that doing so does not change the optical rotation.

DCSHG
Do extra frequency-dependent CPHF for dc-SHG (direct current second harmonic generation) hyperpolarizabilities. This option implies CPHF=RdFreq as well.

Analytic
Analytically compute the polarizability and the hyperpolarizability when analytic third derivatives are available. This option is the default for method with analytic second derivatives: RHF and UHF, CASSCF, CIS, MP2 and DFT methods. Note that the polarizability is always computed during analytic frequency calculations.

DoubleNumer
Computes hyperpolarizabilities in addition to polarizabilities for methods with analytic gradients (first derivatives). Computes polarizabilities by double numerical differentiation of the energy for methods without analytic derivatives. EnOnly is a synonym for DoubleNumer.

Cubic
Numerically differentiate analytic polarizabilities to produce hyperpolarizabilities. Applicable only to methods having analytic frequencies but no analytic third derivatives.

Numerical
Computes the polarizability as a numerical derivative of the dipole moment (it is the analytic derivative of the energy, of course, not the expectation value in the case of MP2 or CI energies). The default for methods for which only analytic first derivative gradients are available.

Step=N
Specifies the step size in the electric field to be 0.0001N atomic units (applies to numerical differentiation).

Restart
Restarts a numerical calculation from the checkpoint file. A failed Polar calculation may be restarted from its checkpoint file by simply repeating the route section of the original job, adding the Restart option to the Polar keyword. No other input is required.

Susceptibility
Compute magnetic susceptibility as well as other properties (see NMR). Available for HF and DFT only.

TwoPoint
When computing numerical derivatives, make two displacements in each coordinate. This is the default. FourPoint will make four displacements but only works with Link 106 (Polar=Numer). Not valid with Polar=DoubleNumer.

Dipole
Compute the dipole polarizabilities (the default).

AVAILABILITY

The following table summarizes the options to Polar that are required to compute polarizabilities and hyperpolarizabilities for the available methods.

Methods    Polarizability    Hyperpolarizability
HF, DFT methods (including analytic 3rd derivatives)    Polar (defaults to Analytic)    Polar (defaults to Analytic)
Other methods with analytic frequencies (MP2, CIS, …)    Polar (defaults to Analytic)    Polar=Cubic
Methods with analytic gradients (CCSD, BD, …)    Polar (defaults to Numeric)    Polar=DoubleNumer
Methods without analytic derivatives (CCSD(T), …)    Polar (defaults to DoubleNumer)    N/A

Frequency-dependent polarizabilities and hyperpolarizabilities (i.e., Polar CPHF=RdFreq) are available only for HF and DFT methods.

RELATED KEYWORDS

Freq, CPHF=RdFreq

EXAMPLES

Frequency-Dependent Properties. The following job will compute frequency-dependent polarizabilities and hyperpolarizabilities using ω=0.1 Hartrees:

# Polar CPHF=RdFreq HF/6-31G(d)

Frequency-dependent calculation: w=0.1

Molecule specification

0.1

Performing a frequency-dependent Polar calculation produces the results for the specified frequency following those for the static case within the output. For example, here are the polarizability values for a frequency-dependent job (ω=0.1 Hartree):

 SCF Polarizability for W=    0.000000:
                1             2             3
      1  0.482729D+01
      2  0.000000D+00  0.112001D+02
      3  0.000000D+00  0.000000D+00  0.165696D+02
 Isotropic polarizability for W=    0.000000       10.87 Bohr**3.
 SCF Polarizability for W=    0.100000:
                1             2             3
      1  0.491893D+01
      2  0.000000D+00  0.115663D+02
      3  0.000000D+00  0.000000D+00  0.171826D+02

 Isotropic polarizability for W=    0.100000       11.22 Bohr**3.

A static polarizability calculation would include only the first section. Similar output follows for hyperpolarizabilities and additional properties.

Optical Rotations. Here is the key part of the output for optical rotations jobs (OptRot option). In this case, we have performed a frequency-dependent calculation by including CPHF=RdFreq in the route section and specified a frequency of 589.3 nm:

 Dipole-magnetic dipole polarizability for W=    0.077318:
                 1             2             3
      1  -0.428755D+01 -0.175571D+01  0.000000D+00
      2  -0.552645D+01  0.987070D+01  0.000000D+00
      3   0.000000D+00  0.000000D+00 -0.676292D+00
 w=    0.077318 a.u., Optical Rotation Beta=     -1.6356 au.
 Molar Mass =    172.2694 grams/mole, [Alpha] ( 5893.0 A) = -366.99 deg.
 

The specific rotation value is highlighted in the example output.


Last updated on: 10 May 2009